XMT842
XTREME MINE TELEHANDLER 842
8,000 lbs Capacity
42 ft Lift Height
28 ft 10 in Forward Reach
74 hp Tier IV Final HT
DESCRIPTION
- 360° operator visibility
- Suspension seat
- Easy service access
- Protected tilt & extend cylinders
- Steel hydraulic & fuel tanks
- Long life Lexan labels
- Heavy duty boom chains
- Suspended pedals
- Large capacity fuel tank
- Trunnion mounted sway cylinders
- Melonite pins
- Standard auxillary hydraulics
- Steel dash
- Center mounted powertrain
- Long life boom rollers
- Cab step
- Ductile steel manifold
- Easy cab mounted grab handles
- Master disconnect switch
- Boom lift point
- Manual lowering valve (cylinders)
- Large cross section boom
- Easy tie downs
- “Y” frame handle
- Heavy duty pre-cleaner
- Additional high pressure hydraulic filter
- Limited slip front axle
- Steel hood
- Solid steel plate chassis
- Rear axle stabilization (RAS)
- Back up alarm with light
- Dual batteries
XMT842 LOAD CHART
TECHNICAL SPECIFICATIONS
| Class Carriage | B |
| Capacity Weight | 8,000 lbs |
| Lift Height | 42 ft |
| Forward Reach | 28 ft 10 in |
| Frame Leveling L/R | 11 degrees |
| Machine Weight | 28,460 lbs |
| Engine | Cummins 3.8L 74 hp (Tier 4F) |
| Axles | ZF MST3055 |
| Transmission | ZF 3WG94 |
| Fuel Capacity | 48 gal |
| Tires | 13.00 x 24 |
| Hydraulic Flow (per min) | 39 gal |
| Hydraulic Pressure | 3,500 psi |
| Hydraulic Oil Capacity | 58 gal |
| Length to fork face | 20 ft 9 in |
| Width | 101 in |
| Height | 8 ft 1 in |
| Wheel Base | 120 in |
| Ground Clearance | 16.5 in |
| Turning Radius | 12 ft |
XTREME MINE TELEHANDLER DOWNLOAD
Below you can download the multi-fold brochure for the XTREME Telehandlers. If you have any special mine application requirements or customization needs, please reach out for additional information.
MULTI-FOLD
GET IN TOUCH
Find out how TES Inc. will deliver exactly what you need, when you need it.